RoomMatch® RM12060
array module loudspeaker
RoomMatch® RM12060 array module delivers superb audio quality for fixed-installations in almost any room size, shape, acoustic requirement or budget. Overcoming the acoustic limitations of both line array and point-source conventional designs, RoomMatch® modules form a new class of curvilinear array that allows seamless audio quality, with consistent front-to-back and side-to-side tonal balance.
Accessories
RMAFLG — large-array frame
Use with 4 to 8 full-range or subwoofer array modules in overhead suspended arrays. Compatible with long and short extender bars. Net weight: 148 lb (67.1 kg).
| Product Code | Color |
|---|---|
| 330038-0110 | Black |
RMAFSM — small-array frame
Use with 1 to 4 full-range or subwoofer array modules in overhead suspended arrays. Net weight: 122 lb (55.3 kg).
| Product Code | Color |
|---|---|
| 330039-0110 | Black |
RMBRKT — surface mount bracket kit
An accessory installation bracket that allows a single RoomMatch full-range array module loudspeaker to be mounted on flat surfaces, such as building walls or ceilings. The brackets allow pitch angle adjustment from 0° up to -90°, depending on which RoomMatch module is used. The bracket attaches to the side-plate rigging hardware of each RoomMatch full-range module. Kit of left and right pair with fasteners. Net weight: 15 lb (6.8 kg) per Left/Right kit. (The RMBRKT bracket is NOT intended for use with RoomMatch subwoofer modules.)
| Product Code | Color |
|---|---|
| 348159-0110 | Black |
RMPULL — pull-back bracket
Use with bottom-most array module to provide third-point suspension to building structure to allow more extreme downward angle of arrays than possible from 2-point, gravity-hang suspension. The RMPULL can also be used as a “mini frame” for suspending 1 or 2 modules. Single bracket with fasteners. Net weight: 26 lb (11.8 kg).
| Product Code | Color |
|---|---|
| 330041-0110 | Black |
RMXLNG — long extender bar
Use with large-array frame to accommodate subwoofer module mounting behind primary array. Also provides additional shackle mounting pickup points to allow more extreme angles for 2-point mounting. Kit of left and right pair with fasteners. Net weight: 88 lb (40.0 kg) per Left/Right kit.
| Product Code | Color |
|---|---|
| 344056-0110 | Black |
RMXSRT — short extender bar
Use with large-array frame to accommodate subwoofer module mounting behind primary array. Also provides additional shackle mounting pickup points to allow more extreme angles for 2-point mounting. Kit of left and right pair with fasteners. Net weight: 70 lb (31.8 kg) per Left/Right kit.
| Product Code | Color |
|---|---|
| 344057-0110 | Black |
RMPINS — quick release pins kit
Set of 4 quick-release pins designed to replace the graded M10 fasteners for module-to-module connections. May be used with RoomMatch® full-range or subwoofer modules. Net weight: 1 lb (0.5 kg) per set.
| Product Code | Color |
|---|---|
| 344511-0010 | Black |
RMSHAD — gain shading kit
Optional accessory that installs in the input panel of RoomMatch full-range modules to allow attenuation of the bottom-3 compression drivers as compared to the top 3 drivers. This allows for more uniform sound pressure levels for specific module configurations and coverage areas. Net weight: 2 lb (0.9 kg).
| Product Code | Color |
|---|---|
| 344058-0110 | Black |
Ground Stack Accessories
RoomMatch Ground stack Kit accessories are designed to accommodate ground stack arrays of up to three (3) RoomMatch modules for occasional movement to different locations, such as temporary side-stage fills for performing arts centers that require differing seating configurations. RoomMatch modules and ground stack accessories are not recommended for tour sound applications that require daily setup and transportation.
- RMGBSK - ground stack base kit
- RMGSCK - ground stack caster kit
- RMGSPB - ground stack pitch brackets
- RMGSSB - ground stack subwoofer brackets
RMGSBK — ground stack base kit
Use with up to three (3) RoomMatch modules for ground stack arrays. Requires subwoofer module in bottom position. Kit includes two (2) frame rails, four (4) M10 x 40mm fasteners, and four (4) leveling feet. Caster kit is available separately. All ground stack array configurations must use the base kit. Overall rail dimensions: 3.0" H x 4.9" W x 54.4" D (75 x 125 x 1382 mm). Net weight: 54 lbs (24.5 kg).
| Product Code | Color |
|---|---|
| 356016-0110 | Black |
RMGSCK — ground stack caster kit
Use with RMGSBK ground stack base kit. Replaces leveling feet included in base kit. Set of four (4) casters with sixteen (16) M8 x 25 mm fasteners. Overall caster dimensions: 5.0” diameter and 1.25” width (127 mm x 32 mm). Net weight: 10 lbs (4.5 kg).
| Product Code | Color |
|---|---|
| 356514-0110 | Black |
RMGSPB — ground stack pitch brackets
Attaches to subwoofer module and mounts one or two RoomMatch full-range modules, allowing pitch angle adjustment from 0 to 30 degrees down pitch (differs by module vertical coverage pattern). Complete pitch bracket is formed by assembly of pitch plate that attaches to subwoofer module and mounting bar that attaches to RoomMatch full-range modules. Kit contains two (2) pitch plates, two (2) RoomMatch full-range module mounting bars, four (4) M10 x 40 mm fasteners, and four (4) M10 x 30 mm fasteners. Pitch brackets also require use of four (4) M10 x 30 mm fasteners (15 mm socket size) supplied with RoomMatch full-range modules. Net weight: 19 lbs (8.6 kg).
| Product Code | Color |
|---|---|
| 356019-0110 | Black |
RMGSSB — ground stack subwoofer brackets
Provides subwoofer-to-subwoofer module connection for ground stack arrays. Includes pair of subwoofer connection plates and eight (8) M10 x 40 mm fasteners. Note: RMGSSB bracket is NOT required for the bottom subwoofer connection to the base kit; subwoofer modules bolt directly to the base frame rails. Net weight: 7 lbs (3.2 kg).
| Product Code | Color |
|---|---|
| 356018-0110 | Black |