Professional Systems Division

Design | Performance | Support

RoomMatch® RM9005

array module loudspeaker

RoomMatch® RM9005 array module delivers superb audio quality for fixed-installations in almost any room size, shape, acoustic requirement or budget. Overcoming the acoustic limitations of both line array and point-source conventional designs, RoomMatch® modules form a new class of curvilinear array that allows seamless audio quality, with consistent front-to-back and side-to-side tonal balance.

Specifications

System Performance
Frequency Response (+/-3 dB) 1 60 Hz - 16 kHz
Frequency Range (-10 dB) 1 55 Hz - 16 kHz
Recommended High-Pass Filter 50 Hz with minimum 24 dB / octave (4th order) slope
Nominal Dispersion 90° H x 05° V
Recommended Crossover Frequency 550 Hz (acoustic, active, external DSP)
Long-Term Power Handling 2
Low Frequency High Frequency
500 W (2000 W peak) 150 W (600 W peak)
Nominal Impedance
4 Ω 8 Ω
Sensitivity (SPL / 1 W @ 1 m) 3
LF No EQ LF With EQ HF No EQ HF With EQ
94 dB SPL 93 dB SPL 109 dB SPL 106 dB SPL
Maximum SPL @ 1 m 4
121 dB SPL (127 dB SPL peak) 120 dB SPL (126 dB SPL peak) 131 dB SPL (137 dB SPL peak) 128 dB SPL (134 dB SPL peak)
Transducers
Driver Compliment HF: 6 x Bose EMB2 extended mid-band high frequency compression drivers (2-inch voice coil)
LF: 2 x Bose LF10 ultra-linear 10-inch woofers (3-inch voice coil)
Physical
Enclosure Baltic birch plywood, engineered plastics, and steel frame
Finish Two-part spray polyurethane coating on plywood, black
Grille 19-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Suspension / Mounting Integrated side-plate rigging hardware; optional array frame accessories
Dimensions 16.9" H x 39.1" W x 23.6" D (428 mm x 993 mm x 598 mm)
Net Weight 123 lb (55.8 kg)
Shipping Weight 180 lb (81.6 kg)- approximate with pallet
Product Code
Black 343928-9005
Footnotes:
  1. Frequency response and range measured on-axis with recommended active EQ in an anechoic environment.
  2. Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
  3. Sensitivity measured in free field (no boundary-loading gain) with recommended active EQ, referenced to 1W/1m.
  4. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.