The options menu allows you to change source related and system settings. The items listed in the menu will vary according to the source you have selected. To select the options menu, follow these steps:
Touch anywhere on the click pad to activate the control frame
Select “Options” on the lower right side to display the menu
Using the up and down navigation buttons, highlight the option you want to change
Using the left and right navigation buttons, change the setting
To exit the menu and save the changes, press the OK button, or select “Exit” at the top or bottom of the list
The following describes the settings that are available for each option. The actual number of options appearing in the menu may differ for each source. The asterisk (*) indicates the factory setting.
Exits the menu and returns to normal viewing. This function appears at the top and bottom of the menu.
Selects an alternate audio track, such as a Secondary Audio Program (SAP), when it is available.
Track 1:* Selects track 1
Track 2: Selects track 2
Both Tracks: Selects tracks 1 and 2
Not Available: Automatically selected when no alternate track is available
Turns the channel number queue off, or specifies the maximum number of digits used for the source you have selected. The size of the queue should be set to hold the largest number used by the source.
2 digits: Number sent after 2 digits entered (00 to 99)
3 digits:* Number sent after 3 digits entered (000 to 999)
4 digits: Number sent after 4 digits entered (0000 to 9999)
Off: Each digit sent immediately when selected
Provides an adjustable control to insure a smooth and clear picture for sports and fast-moving action scenes.
None: No motion smoothing
Low: Minimal motion smoothing
Default:* Normal motion smoothing
High: Maximum motion smoothing
Note: Movies will appear to be more natural and lifelike when motion smoothing is on. However, you can set motion smoothing to "None" if you prefer to view films the way the director intended them to appear.
Provides audible feedback when you glide your thumb along the click pad or select a highlighted function.
On:* Sound accompanies the movement of your thumb on the click pad
Off: No click pad sounds
Adjusts the bass compensation level from -14 to +14 (-9 to +6 if ADAPTiQ® audio calibration has been performed)
Adjusts the treble compensation level from -14 to +14 (-9 to +6 if ADAPTiQ® audio calibration has been performed)
Provides video presets for normal and dark ambient light conditions.
Normal:* Optimized for most lighting conditions
Dark Room: Optimized for especially dark lighting conditions
For more video settings, see Adjusting basic video settings
Returns the video settings to factory values.
Automatically turns the system off.
Enabled:* The system turns off automatically after 4 hours of no remote control button pushes, or 20 minutes of no audio or video signal
Disabled: No automatic off feature
Was this article helpful?
Thank you for your feedback.
Sorry you couldn't find the information you wanted. We can help. Please contact us.
